메뉴 건너뛰기

정보자료게시판

장비/디자인/구조

[아두이노] ESP32 - 정밀온습도센서 BME 280 제어

by 라키 posted Nov 19, 2018
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄

[아두이노] ESP32 - 정밀온습도센서 BME 280 제어

목표

ESP32로 BME 280 제어하기

제어 테스트 소스

/*********
  Complete project details at http://randomnerdtutorials.com  
*********/

#include <Wire.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_BME280.h>

/*#include <SPI.h>
#define BME_SCK 18
#define BME_MISO 19
#define BME_MOSI 23
#define BME_CS 5*/

#define SEALEVELPRESSURE_HPA (1013.25)

Adafruit_BME280 bme; // I2C
//Adafruit_BME280 bme(BME_CS); // hardware SPI
//Adafruit_BME280 bme(BME_CS, BME_MOSI, BME_MISO, BME_SCK); // software SPI

unsigned long delayTime;

void setup() {
    Serial.begin(9600);
    Serial.println(F("BME280 test"));

    bool status;

    // default settings
    // (you can also pass in a Wire library object like &Wire2)
    status = bme.begin(0x76);  
    if (!status) {
        Serial.println("Could not find a valid BME280 sensor, check wiring!");
        while (1);
    }

    Serial.println("-- Default Test --");
    delayTime = 1000;

    Serial.println();
}

void loop() { 
    printValues();
    delay(delayTime);
}

void printValues() {
    Serial.print("Temperature = ");
    Serial.print(bme.readTemperature());
    Serial.println(" *C");

    Serial.print("Pressure = ");

    Serial.print(bme.readPressure() / 100.0F);
    Serial.println(" hPa");

    Serial.print("Approx. Altitude = ");
    Serial.print(bme.readAltitude(SEALEVELPRESSURE_HPA));
    Serial.println(" m");

    Serial.print("Humidity = ");
    Serial.print(bme.readHumidity());
    Serial.println(" %");

    Serial.println();
}

/***************************************************************************
  This is a library for the BME280 humidity, temperature & pressure sensor

  Designed specifically to work with the Adafruit BME280 Breakout
  ----> http://www.adafruit.com/products/2650

  These sensors use I2C or SPI to communicate, 2 or 4 pins are required
  to interface. The device's I2C address is either 0x76 or 0x77.

  Adafruit invests time and resources providing this open source code,
  please support Adafruit andopen-source hardware by purchasing products
  from Adafruit!

  Written by Limor Fried & Kevin Townsend for Adafruit Industries.
  BSD license, all text above must be included in any redistribution
 ***************************************************************************/

준비

참고한 자료


  1. [주치의] 피곤하거나 성관계만 해도…자꾸 재발하는 방광염, 예방법은?

  2. [정부청사, 뚫렸다] 송씨 “2년 넘는 시험 준비에 지쳐서 범행”…압수된 공무원 출입증은 3개

  3. [전자책] 찬송가 (가사) epub 입니다.

  4. [육아 이야기] 오은영 박사? 아이를 키우면서 욱하지 말라는데 그게 말이 되나요?

  5. [육아 이야기] 아이가 떼를 써서 미칠 것 같아요. 도와주세요.

  6. [유해물질] 방수스프레이

  7. [욱! 엄마가 무서워요 ①] “남편 전화 정말 짜증…송중기 얼굴 뜨게 바꿨어요”

  8. [영화] 칠드런 오브 맨, Children of Men

  9. [영어 명언] Accept challenges,

  10. [영상] 룩셈부르크, 네덜란드, 쾰른 여행

  11. [어저께TV] '라스' 장동민♥나비, 다음엔 결혼 후 나오는 걸로

  12. [아두이노] 정밀온습도센서 정보를 핸드폰(Blynk)으로 보내기

  13. [아두이노] 시리얼 통신 예제

  14. [아두이노] 수위를 감지해 자동 급수

  15. [아두이노] 버튼 누르면 LED 켜지게

  16. [아두이노] 모스펫으로 고전압 장비 속도 아날로그 제어

  17. [아두이노] 릴레이 Digital Write, LOW 시 릴레이 On(전원 공급), 왜?

  18. [아두이노] ESP32-XBee-초음파 센서 배터리 지속기간

  19. [아두이노] ESP32 - 정밀온습도센서 BME 280 제어

  20. [아두이노] ESP32 - LCD 연결하기

Board Pagination Prev 1 ... 30 31 32 33 34 35 36 37 38 39 ... 45 Next
/ 45
위로